Coat Hanger Cover {Tutorial}

Coat Hanger Covers make a great home made gift and are perfect for hanging special garments in your wardrobe.

Plain wire coat hangers are functional but not very pretty. They seem to multiply in our home. They can be easily dressed up with some pretty fabric, broderie anglaise trim, and felt flowers. This is a fat quarter friendly project and is suitable for the beginner sewer.

We think these pretty coat hangers would make a lovely Mother’s Day gift. Make a lavender sachet to hang inside the cover to repel moths and freshen your ward robe.

You will need:

• fat quarter of quilting fabric for the cover (20 x 22 inches; 50 x 56 cm)
• scrap of coordinating fabric for the flower
• 1 yard (1 metre) of broderie anglais trim, pompom trim, or similar
• co-ordinating felt or ready cut felt flowers
• small button
• 6 inches (15 cm ) of plastic tubing
• cardstock
• spray starch

Method:

To cut the fabric for the cover, lay out the fabric and place the coat hanger on top. Cut around the coat hanger as shown in the photo. Leave 1/4 inch seam allowance on the sides and top of the cover, and leave 2 inches along the bottom of the cover. Cut two for the front and back of the cover.

Serge (Overlock) along the top and bottom edges on the front and back of the cover.

Pin the front and back of the cover together with right sides facing. Stitch together along the sides and angled sides of the cover, using a 1/4 inch seam allowance. Leave the top of the cover and the bottom of the cover open. Overlock the edges.

Trace a circle that measures 3 inches in diameter onto a piece of card. Cut a circle from the co-ordinating fabric that measures 3 3/4 inches in diameter. Moisten the edge of the fabric circle with spray starch. Using the card as a template, press the edge of the fabric over the card to create a circle with turned under edges for the appliqué.

Cut flower shapes from the felt. Layer the felt flowers and stitch onto the centre of the circle using a small button in the centre. Pin the flower appliqué to the centre of the coat hanger cover, and hand stitch in place.

Cut a length of plastic tubing and cover the top of the hanger.

If you enjoyed this project, you may be interested in our Dust Cover {Tutorial}. Check our more of our Gifts to Sew. 

Hello! Are you new here?

If so, be sure to sign up for our newsletter here and receive a bonus sewing pattern and welcome discount. Our newsletter includes free tutorials, articles, and new patterns. Welcome to the world of sewing enthusiasts.